Automatic Mesh Welding Machine for AAC Panel

The round steel plate material (cold drawn, hot rail can be) is automatically processed and welded into steel mesh sheet; The longitudinal bar enters the welding area through the guide parts, and the transverse bar falls through the blanking mechanism.

In the welding area, the magnet is absorbed between the upper and lower electrodes. After being detected in place by the transverse bar detection device, the alignment valve action is made so that the end length of the transverse bar is the same and the mesh is neat. Then the pressure cylinder action is made, and the welding transformer is discharged and welded according to the set current and time.

(1) The mesh stepping mechanism is controlled by CNC servo motor, with high accuracy and easy adjustment;

(2) separable pay-off tray, reasonable design, fast refueling;

(3) Replace the mesh specifications: the spacing between the longitudinal bars increases by 50mm, and the spacing specifications between the longitudinal bars are adjusted

The whole is adjusted by opening or closing the valve of the cylinder. Mesh size adjustment is convenient

(Take the adjustment of 5 longitudinal bars to 4 as an example, the adjustment time is about 3-5 minutes

Complete);

(4) The electrode height can be adjusted, transformer voltage can be adjusted, low production cost.

Hot Tags: automatic mesh welding machine for AAC panel, China automatic mesh welding machine for AAC panel suppliers, factory, Insert Pull Rod Crane For Aac Panel, ALC Panel Section, ALC AAC Panel Conveyor, Drying System For Aac Panel, Automatic Mesh Welding Machine For Aac Panel, Saddle Steel Rod For Aac Panel