Mar 30, 2023 Leave a message

Safety instructions for maintenance and operation of chemical mixers after use

As a commonly used machinery in many industries, chemical mixers require daily maintenance and upkeep to ensure their efficiency. So, how to properly maintain and operate their models? Let's take a look at the introduction of their safety operation instructions.
1. This instrument is not suitable for handheld operation;
2. Do not operate the rolling instrument with no load;
3. Before replacing the mixing paddle and installing accessories, it is necessary to close or disconnect the power supply;
4. Do not touch the end of the mixing paddle or the drill bit ratchet, even minor damage may cause the output of the mixing paddle to be unstable;
5. Due to the high torque output of this instrument, special attention needs to be paid to selecting and using brackets, clamps, and container fixing clamps;
6. When operating, it is necessary to comply with the allowed speed scale of the mixing paddle, and do not set too high a speed;
7. Before debugging the chemical mixer, ensure that the speed control knob is set to the low speed position, otherwise the instrument will operate at the speed set in the previous time;
In short, when maintaining the chemical mixer, it is necessary to follow the corresponding operating requirements, which can effectively ensure the efficiency and performance of the equipment in the later stage of use, and also extend the service life of the equipment.

Send Inquiry

whatsapp

Phone

E-mail

Inquiry