What types of aerating equipment are included in the complete set of concrete equipment for the aerating line

The complete set of equipment for aerated concrete production is a complete set of equipment, which includes various equipment, combined to complete the production of aerated concrete. Aerated concrete is a new type of building wall material mainly made from cement, lime, fly ash, tailings, river sand, and aerated auxiliary materials through processes such as batching, mixing, pouring, cutting, autoclaving, and maintenance. The product has evenly distributed air holes inside, and has the advantages of lightweight, high-strength, insulation, sound insulation, fire prevention, and environmental protection. It is an energy-saving and environmentally friendly building wall material widely used internationally.
So, let's talk about which aerating equipment is used in the complete set of concrete equipment for the aerating line
1. Aerated wire cutting machine: The cutting machine is the core equipment of the aerated concrete production line, playing a unique vertical cutting role, cutting the embryo.
2. Flip demolding hanger: Flip demolding hanger is one of the main equipment in the blank cutting section of the aerated concrete production line. It is installed on the supporting crane, and the lifting and flipping power of the hanger is provided by the hydraulic station.
3. Marshalling spreader: After cutting, the semi-finished product spreader is used to transport the billet to the autoclave trolley and enter the kettle for marshalling.
4. Flip bottom lifting device: Flip bottom lifting device is the main equipment of the aerated concrete production line, which flips, bottoms, and groups the cut blank.
5. Ball mill: suitable for grinding various ores and other materials.
6. Storage tank and control system: used to store prepared fly ash slurry or mortar, with slow mixing to prevent slurry settlement.
7. Jaw crusher: mainly used for medium and coarse crushing operations of various materials with compressive strength not exceeding 320 MPa. It has the characteristics of high crushing ratio, high output, uniform product particle size, simple structure, reliable operation, easy maintenance, and economic operating costs.
8. Pouring mixer: After measuring various materials and water, they are collected into the cylinder of the pouring mixer. After being stirred by the mixer to a suitable slurry for pouring, the discharge butterfly valve is opened to pour the slurry into the mold for static maintenance.
9. Mold: The main specialized equipment for the production of aerated concrete. After the slurry from the pouring mixer is injected into the mold, it undergoes gas curing to form a cuttable aerated concrete body.
10. Primary curing room: after pouring, the mold is sent to the primary curing room with a winch for gas generation and initial setting. The room temperature is 50-70 ℃, and the primary curing time is 1.5-2 hours.
11. Steam curing trolley: a carrier that carries the side plate and the billet into and out of the autoclave.
12. Autoclave: Equipment used for hydration reactions of silicate products to obtain physical and mechanical properties. Its operation is used in the production of aerated concrete such as fly ash, which is an important content related to safety production and energy utilization.
The complete set of concrete equipment for the aerated line is composed of the above equipment, which is used to produce aerated bricks.